Waxing

Depilate Wax Heater

Depilate Wax Heaters

1. Wax Heater
   These 1 litre Xanitalia wax heaters imported from Italy as know for their reliability and quality. The thermostat allows you to adjust the heat temperature and suitable to use for all type of wax. The interior is Teflon lined which means they are easy to clean. Made in Italy
2. Trio Wax Heater
   The Trio kit professional waxing roller unit is made up of three roller-holding heaters inserted into the one sturdy power base. The roller-holders are insulated to allow for easy handling. The wax is heater at a consistent temperature to make wax application smoother and thinner than traditional methods. This unit is attractive and easy to maintain. Each roller holder has a thermostat which maintains the using temperature of the wax constant. Made in Italy
3. Mono Waxing Cartridge Heater
   Single waxing cartridge heater can be add further units later on (up to 10 mono units can be fitted together to obtain a multiple appliance.) The streamlined compact size means less clutter. The mono holds any Xanitalia 100ml wax cartridges and the insulated cartridge holder comes with a hygienic roller cover. The system maintains a consistent operating temperature and is insulated to protect therapist hands. Made in Italy

PoT Wax Heaters

Export Round Wax Pot Heater

With its metal casing, this heater has been designed to heat quickly yet keep wax warm for longer. 10cm diameter melting plate. Used for heating 800ml cans.

Made in Italy

Export Square Wax Pot Heater

This practical and sturdy heater is producted in metal. Designed to be particularly long-lasting, it also boasts a highly sensitive thermostat bulb. 10cm diameter melting plate.

Made in Italy

Elegance 400 Wax Pot Heater

This ultra sensitive thermostat and adjustable temperature control gurantees wax is also heated to the perfect temperature. 400ml capacity.

Made in Italy

T-612 Wax Pot Heater

BUY NOW!

268 Wax Pot Heater

Dimensions: (L) 200 x (W)180 x (H) 80mm

Power: 80W

Voltage: 220V 50Hz

Weight: 1.6 kg

Directions of use: Put the wax in the wax heater and heat unti the wax melts, then apply on the skin to achieve the effect of shedding

Single Wax Pot Heater 500ml

Wide range of operating temperatures available, designed to suit all types of waxes warm and creme strip waxes, hot wxes and paraffin waxes

Beautifully moulded in high resistant, durable materials with accurate controls and settings for simple operation and ease of use.

Direct insertion of jars provides flexibility to use waxes of your choice. The heater features sealed heat chambers designed for direct pouring of waxes for a particular type of treatment. Alternatively, wax in plastic jars or metal tins can be directly inserted into the wax heater to melt the wax, allowing the wax container to be removed and sealed at the end of use. This is deal when undertaking mobile waxing treatment.

Features:

• Pot capacity 500ml. Supplied with an extra removable insert pot 500ml.
• Easy use lifter with scraper bar
• Sleek high grade plastic heater unit with safety handle
• Base doubles as a collar when flipped over
• Indicator light for power supply
• Indicator light is on/off automatically when it reachs the preset temperature
• Temperature controlling knob.
• Highest temperature 95 °C

Power: 270W

Voltage: 220V 50Hz

Directions of use:

1. Remove lid and either fill the inner chamber directly with the wax of yhour choice OR place the jar or tin of wax directly into the inner chamber.
2. Plug into mains power supply and turn on switch
3. Move regulator tempreature control clockwise to setting suitable for the type of wax to be used.

Double Wax Heater

Double wax heater ideal for heating wax tins

Features:

• 500ml + 500ml wax pots (for 450g and 450g wax tins)
• Temperature can be adjusted from 45-105 °C

Power: 270W

Voltage: 220V 50Hz

4-in1 Multi Wax Heater

4-in-1 multi wax heater ideal for heating wax tins and roller wax catridges

Features:

• 500ml wax pot (for 450g wax tin) + 3 x 100g roller wax catridges
• Temperature can be adjusted from 45-105 °C

Power: 320W

Voltage: 220V 50Hz

Directions of use:

For Waxing depilation:

1. Put can wax into heater tank and cover the lid. Switch on the mains supply
2. Adjust temperature using the knob. Plug out when the wax is melted for treatment.
3. Make sure skin is perfectly clean and dry. Do not carry out hair removal on irritated or particularly sensitive skin or in presence of spots, injuries, burns or other skin problems.
4. Roll on the product in the direction of hair growth and apply it to cover an area of approx 15-18cm. Before beginning the application, make sure that the wax has reached the correct temperature. If the wax is too hot, suspend the application.
5. Apply a paper strip to the area to the area being treated. Press the strip well onto the skin by applying pressure with the palm of the hand.
6. Remove the paper strip in the opposite direction to that of the hair growth by pulling it away sharply and parallel to the are being treated.
7. Keep the skin taut while pulling away the strip. Do not pull the strip upwards from the skin. The strip may be used several times.
8. After hair removal, clean the area with after wax cleansing oil.
9. After cleaning, massage with fragrance free moisturiser.

For Parrafin Wax:

1. Put paraffin wax portable aluminium pot and cover the lid. Switch on the mains supply.
2. Clean your hands/elbow/feet.
3. Put parrafin wax into the machine, plug in and power on.
4. Try placing the melted wax on your inner wrist and adjust to a suitable temperature.
5. Dip hands/elbow/feet several times into the wax to form a soft glove of heated paraffin wax. Do not put your hand or elbow into the wax for more than 2 seconds at a time. Option: To enhance the treatment, place your hands into glove mittens to insulate and keep warmth in.
6. Leave to cool off. Massage skin for complete softness.
7. After treatment, turn off the power and pull out the power cord.
8. The paraffin wax can remain in the pot where it will cool solid and can be used during the next treatment.

Note:

• Do not use on sensitive skin or skins that have bruises, rankles, turgid, whelks or other problems.
• Stay out of sunlight and away from UVA rays in the 24 hour period following hair removal.

Roller Wax Heaters

Evolution Duo Kit Roller Wax Heater

The Evolution range represents a well-rounded line to meet all needs. Thanks to its ergonomic handle, this model is particularly easy to use.

The Evolution Duo Kit comprises a base of two heating roller holders. Very practical and functional especially for professional use as it is always possible to have two refills ready for use. It has a 220V input and is heated by ceramic resistances a a pre-set temperature.

Made in Italy

Directions of use:

1. Insert wax refills into roller holders and switch on the mains supply.
2. Leave the wax to heat for approximately 30-40minutes and then proceed with hair removal.
3. Make sure skin is perfectly clean and dry. Do not carry out hair removal on irritated or particularly sensitive skin or in presence of spots, injuries, burns or other skin problems.
4. Roll on the product in the direction of hair growth and apply it to cover an area of approx 15-18cm. Before beginning the application, make sure that the wax has reached the correct temperature. If the wax is too hot, suspend the application.
5. Apply a paper strip to the area to the area being treated. Press the strip well onto the skin by applying pressure with the palm of the hand.
6. Remove the paper strip in the opposite direction to that of the hair growth by pulling it away sharply and parallel to the are being treated.
7. Keep the skin taut while pulling away the strip. Do not pull the strip upwards from the skin. The strip may be used several times.
8. After hair removal, clean the area with after wax cleansing oil.
9. After cleaning, massage with fragrance free moisturiser.

Note:

• Do not use on sensitive skin or skins that have bruises, rankles, turgid, whelks or other problems.
• Stay out of sunlight and away from UVA rays in the 24 hour period following hair removal.

Evolution Trio Kit Roller Wax Heater

The Evolution range represents a well-rounded line to meet all needs. Thanks to its ergonomic handle, this model is particularly easy to use.

The Evolution Trio Kit comprises a base of three heating roller holders. Very practical and functional especially for professional use as it is always possible to have three refills ready for use. It has a 220V input and is heated by ceramic resistances a a pre-set temperature. Made in Italy

Base Mono Kit Roller Wax Heater

The Base Mono Kit is made up of a roller-holding heater, a support and a power cable. It is very convenient and practical for home depilation as well as for professional use. An internal thermostat maintains the using temperature of the wax constant.

Made in Italy

Base Duo Kit Roller Wax Heater

The Base Duo Kit is made up of two roller-holding heaters inserted into a sturdy power base. It is very convenient and functional for professional use since two wax refills are always ready and available. Each roller holder has a thermostat which maintains the using temperature of the wax constant.

Made in Italy

Base Trio Kit Roller Wax Heater

The Base Trio Kit is made up of three roller-holding heaters inserted into a sturdy power base. It is very convenient and functional for professional use since three wax refills are always ready and available. Each roller holder has a thermostat which maintains the using temperature of the wax constant.

Made in Italy

Single Roller Wax Heater

Easy to operate for effective hair removal. Ideal for heating 100g roller depilatory wax catridge.

Power: 40W

Voltage: 220V 50Hz

Directions of use:

1. Insert wax refills into roller holders and switch on the mains supply.
2. Leave the wax to heat for approximately 20-30minutes and then proceed with hair removal.
3. Make sure skin is perfectly clean and dry. Do not carry out hair removal on irritated or particularly sensitive skin or in presence of spots, injuries, burns or other skin problems.
4. Roll on the product in the direction of hair growth and apply it to cover an area of approx 15-18cm. Before beginning the application, make sure that the wax has reached the correct temperature. If the wax is too hot, suspend the application.
5. Apply a paper strip to the area to the area being treated. Press the strip well onto the skin by applying pressure with the palm of the hand.
6. Remove the paper strip in the opposite direction to that of the hair growth by pulling it away sharply and parallel to the are being treated.
7. Keep the skin taut while pulling away the strip. Do not pull the strip upwards from the skin. The strip may be used several times.
8. After hair removal, clean the area with after wax cleansing oil.
9. After cleaning, massage with fragrance free moisturiser.

Note:

• Do not use on sensitive skin or skins that have bruises, rankles, turgid, whelks or other problems.
• Stay out of sunlight and away from UVA rays in the 24 hour period following hair removal.

Double Roller Wax Heater

Ideal for heating 100g roller depilatory wax catridges. Melting time is about 15mins

Power: 40W

Voltage: 220V 50Hz

Voltage: 220V 50Hz

Directions of use:

1. Insert wax refills into roller holders and switch on the mains supply.
2. Leave the wax to heat for approximately 20-30minutes and then proceed with hair removal.
3. Make sure skin is perfectly clean and dry. Do not carry out hair removal on irritated or particularly sensitive skin or in presence of spots, injuries, burns or other skin problems.
4. Roll on the product in the direction of hair growth and apply it to cover an area of approx 15-18cm. Before beginning the application, make sure that the wax has reached the correct temperature. If the wax is too hot, suspend the application.
5. Apply a paper strip to the area to the area being treated. Press the strip well onto the skin by applying pressure with the palm of the hand.
6. Remove the paper strip in the opposite direction to that of the hair growth by pulling it away sharply and parallel to the are being treated.
7. Keep the skin taut while pulling away the strip. Do not pull the strip upwards from the skin. The strip may be used several times.
8. After hair removal, clean the area with after wax cleansing oil.
9. After cleaning, massage with fragrance free moisturiser.

Note:

• Do not use on sensitive skin or skins that have bruises, rankles, turgid, whelks or other problems.
• Stay out of sunlight and away from UVA rays in the 24 hour period following hair removal.

Parrafin Wax Heaters

Paraffin Wax Heater Machine

The paraffin heater has a strong metal body and is white powder-coated. The timer can be pre-set to start unit heating at a specified time so that paraffin can be melted and at therapy time when the salon opens for the day (which is handy considering it takes approx. 3 hours to heat 4kg of paraffin.) It contains an internal thermostat to maintain a consistent temperature and the safety mesh at the bottom prevents client contact with the heating surface. Made in Italy

Dimensions: (D) 432mm x (W) 233mm x (H) 205mm

Export Paraffin Wax Heater Machine

The paraffin warmer features an extremely modern and pracdtical design. Its functionality together with the possibility to adjust the temperature precisely and the use of an electronic thermostat make this appliance a highly advanced and interesting item.

Made in Italy

Paraffin Wax Bath 937 (Home Parrafin Bath)

BUY NOW!

Parrafin Wax 150W

Idea for heating paraffin wax.

Features:

• Paraffin treatment make skin soft and smooth with its outstanding effect especially on dry, ageing and rough skins and during winter
• With its simple operation and perfect effect, it is popular with beauticians worldwide
• It can improve the blood circylation of the feet and metabolism of the skin
• It can also eliminate the ageing dead cells, improve rough and dry skin, moisten and relax the skin and diminish inflammation
• Temparture: Melting wax 70°C. Insulation: 60°C

Power: 120W

Voltage: 220V 50Hz

Directions of use:

1. Clean your hands/elbow/feet.
2. Put parrafin wax into the machine, plug in and power on.
3. Try placing the melted wax on your inner wrist and adjust to a suitable temperature.
4. Dip hands/elbow/feet several times into the wax to form a soft glove of heated paraffin wax. Do not put your hand or elbow into the wax for more than 2 seconds at a time. Option: To enhance the treatment, place your hands into glove mittens to insulate and keep warmth in.
5. Leave to cool off. Massage skin for complete softness.
6. After treatment, turn off the power and pull out the power cord.
7. The paraffin wax can remain in the pot where it will cool solid and can be used during the next treatment.

Depilate Wax

Liposoluble waxes are professional depilatory waxes characterised by their application at low temperatures. They are made from natural prin resin, and specific processes turn this pure or refined resin into depilatory waxes.

Depilatory waxes used with roller as the most recent depilatory products and have become widespread due to the fact that they are easy to use. The waxes are warmed on proper heaters and can be applied by less experienced hands, as it is the roller that controls the even and constant flow of the wax strip.

LISSE Soft Honey Wax 400ml

BUY NOW!

Made with the finest ingredients, this wax has been developed for using with strips. When using Lisse Soft Honey wax, Lisse epilation strips are recommended.

Made in Italy

Volume: 400ml

Ingredients: Glyceryl Hydrogenated Rosinate, Paraffinum Liquidum

Directions of use: Melt product completely. Use the spatula to spread a thin layer, applying in the direction of hair growth. Place a fabric strip over the wax and press to adhere. Proceed by pulling sharply against the direction of hair growth.

Warning: Do not use on irritated, injured or chapped acne-affected or spotted skin, on moles, varicose venis and capillaries, on sun burns or other kinds of burning. Wait 24 hours before applying any deodorant perfume, or alcoholic lotion to the depilated area. Keep out of the reach of children.

LISSE Honey Wax Roller Catridge 100ml

BUY NOW!

Made in Italy

Volume: 100ml

Hara Creme Wax 425g

Volume: 425g

Wax Roller Catridges 100ml
Chocolate / Creme / Green Tea/ Lemon

Chocolate:

• Normal/Sensitive skin  - fine/normal/coarse hair
• A creme wax that provides a wonderful aroma to put any client at their ease.
• With the additional benefits of the low operating temperature and moisturising properties of cocoa butter, it is a good alternative for stressed, agitated clients.

Creme:

• Normal skin  - fine/normal/coarse hair
• A similar wax to that of warm wax except it has a lower operating temperature and added moisturising ingredients for a softer smooth result.

Green Tea:

• Normal/Problem skin  - normal/coarse hair
• An excellent creme based wax containing green tea known for its natural antiseptic qualities.
• An ideal option for use on clients suffering with in-grown hairs and for those clients' who are allergic to tea tree.

Lemon:

• Normal/Oily skin  - normal to coarse hair
• A creme pearlised wax containing lemon oil know for its refreshing and cooling properties.

Paraffin Wax

LISSE Paraffin Wax 550ml

BUY NOW!

This treatment method based on low-melting paraffins has become increasingly popular. This was used initially only for treating hands and feet, but is now being used also to treat the body. It concerns plastic refined paraffins that melt at very low temperatures (38-40°C) and can therefore be used as plastic masks.

Made in Italy

Volume: 550ml

Paraffin Wax 1lb bag

Natural paraffin, enriched with extracts of lavender and vitamin. Moisturises and purifies the skin layers with its intense antiseptic action.

Volume: 1lb

Waxing and Depilate Accessories

HT-666 Wax Epilate Strips, 100pcs

9" x 3" bonded fibre epilation strips. Suitable for use with all depilatory waxes

Non-woven Wax Epilate Roll, 100m

Wax Epilate Roll 90gsm, 7cm x 91.4m

Our full range of waxing supplies include:

• Hair Removal Waxing Kits
• Roll-on Hair Wax
• Hair Wax Warmers
• Hair Waxing Strips