Please note that our electrical equipment run on 240V power unless otherwise stated.
Users in countries that run on 110V power (e.g. US, Japan) will need to purchase their own transformer/adaptor to use the device in their countries.

Digital Perm

CREATE Wave Master
(Fully digitalised)

The Wave Master produced by Create boasts of many differentiations from the former analogue-run heat perm machines that could just manipulate time and temperature considering the overall hair damages.

This fully digitalised machine is programmed to automatically adjust time and temperature in consideration of a part of hair damage and even length of hair, which can be termed 'design' a perm style in a more elaborate way with a revolutionary rods using thin film heater.

Features:

• Varied pre-set menus according to the length of hair, let alone Special Perm mode
• Ocher rods used with thin film heater for constant temperature control
• Convenient and fully-Digitalized control panel
• Silicon ring band that indicates the state of rod temperature
• Error-detecting system for each rod operation

CREATE Digital Setting Perm Perm
(Ceramic Rods Digital Perm Machine)

A natural wave-permanent is available with fast and revolutionary. Bouncy, elegant curls are achieved which is unattainable with regular rod permers. Maintains vividly shiny curls for long periods of time.

• One-touch Controller with Digital Functions
• Ceramic Rods - 13 mm, 16 mm, 20 mm, 25 mm, 30 mm
• 220V / 400W / 60Hz

CREATE Minimini in Multi Perm
(Multi Perm Machine)

Minimized in size yet contains all the functions of a full size permanent wave device. A-top-of-the-line machine with special coated rods for all forms of permanent waves .

• Easy to clip in and off state-of-the-art ceramic rods.
• Varied model types A: Stand, B: Mini Stand (desktop), & C: Wall mount.
• Different temperature modes: Setting Perm Mode, Digital Perm Mode, or Rod Wave Perm.
• Increased Sizes: 12, 14, 16, 18, 20, 22, 24, 26, 28, 30, 40, & 50 mm
• Use with Cuenic Heat Active Multi Perm Lotion 1 and Neutralizer 2

CREATE Twin Belle Plus
(Digital Perm Machine)

Far-infrared heat and ozone (O3) emanating appliance. Excellent maneuverability offered by fully computerized hassle-free digital controller.

• Air purification function by generation of ozone.
• Newest and most advanced ceramic technology used.
• State-of-the-art European design including space saving chests.
• Flexible air dispenser for any directional use.
• Easy to connect rods and connecting wires.
• Rod sizes: 1/2", 3/5", 2/3", 4/5" & 7/8"

CREATE Z-ion
(15 Minute Perm Machine)

Create multiple styles of curls in less than 15 minutes with no damage and wear offs from using chemical perm solutions. A simple wave perm device using heated rods

• Zirconium: Emits 3 times of far-infrared rays as much as normal materials
• Tourmaline: Emits a number of negative ions. Rods with unbreakable hardness
• Aluminum: Quicker thermal conduction
• Anodized technology: Strength & Anti-rust against chemical aggression
• Poly carbonated surface of rods: Resistant against heat & pressure

HT-3635 Digital Perm Machine

HT-3637 Digital Perm Machine

HT-3638 Digital Perm Machine

HT-3639 Digital Perm Machine

CREATE Swing Belle Hair Processor Setting Machine

Swing Belle will replace the infrared device, hood dryer and Ozone devices all in one. This multi-functionality results in effective colouring, perming, hair conditioning or treatment.

• One-touch Digital Controller
• Ceramic Cap
• Temperature Perception Sensor
• 220V / 60Hz / 700W

Hairizon HPL170 Roller Ball Hair Processor Setting Machine
Hairizon HPL170W Roller Ball Hair Processor Setting Machine Wall Type

This hair drying machine is a revolutionary multi-function hair colour processor. It features 360 degrees rotation and infared lamp of deepest conditioning and even colour acceleration. It is available as a standing unit or a wall-mounted swing arm unit that does not take up valuable floor space.

Directions of use: Drying machine should be adjusted and placed 12cm at the pivot from the top of head and 5cm at the position guide from rear of the neck. Turn on the power switch. Select the operation mode desired and adjust the heat level and time. Press the start key, then the circular heater will rotate. When the operation time is up, cool air will release from the nape fan. Turn off the power switch after use.

Hairizon HPL177 Butterfly Hair Processor Setting Machine
Hairizon HPL177W Butterfly Hair Processor Setting Machine Wall Type

This hair drying machine has an innovative design comprising of two arch-shaped swing heaters which move in a gentle motion. The heaters envelope the head area, allowing the deepest conditioning and even colour acceleration. The double swing heater system maximises utilisation of short and long infrared waves to increase efficiency. That is often referred to as smooth and relaxing, while at the same time provides effective treatment of hair that is damaged by perm and colouring.

Directions of use: Drying machine should be adjusted and placed 4-6cm at the two arch-shaped heater from the top of head and 5cm at the position guide from rear of the neck. Turn on the power switch. Select the operation mode desired and adjust the heat level and time. Press the start key, then the circular heater will rotate. When the operation time is up, cool air will release from the nape fan. Turn off the power switch after use.

Infra Quart Hair Processor Setting Machine

Ozone Steamers

CREATE O3 Misteamer Ozone Steamer

Generating 3-micron mist particles, providing balanced moisture to hair strands. Adding silky smoothness & gloss sheer to the hair while reducing odor of chemical solutions by the action of ozone. Preventing dandruff build-up & inhabitation of alopecia (hair loss) bacteria. Multifunctional use for treatment, conditionaing, styling, coloring, permanent waving and discoloring

HT-3000 O3 Ozone Steamer

Dimensions: 100 x 30 x 30 cm

Hair Steamers

HT-792 Hair Steamer

BUY NOW!

Utilises steam to open up the cuticle for better penetration of conditioner and/or treatments while adding moisture

Directions of use: Add water to the water bottle without exceeding the highest water line. Tighten the drain pipe onto the water bottle. Invert the water bottle and place into its compartment. Connect the power cord and set the timer to the required time. Turn on Switch 1 for medium temperature steam. Turn on Switch 2 for low temperature steam. For high temperature steam, turn on both Switches 1 and 2.

HT-792A Hair Steamer

BUY NOW!

Utilises steam to open up the cuticle for better penetration of conditioner and/or treatments while adding moisture

Directions of use: Add water to the water bottle without exceeding the highest water line. Tighten the drain pipe onto the water bottle. Invert the water bottle and place into its compartment. Connect the power cord and set the timer to the required time. Turn on Switch 1 for medium temperature steam. Turn on Switch 2 for low temperature steam. For high temperature steam, turn on both Switches 1 and 2.

185 Ozone Hair Steamer

BUY NOW!

Digital hair steamer with ozone and extra large hood - diameter is 38mm bigger than normal.

Utilises steam to open up the cuticle for better penetration of conditioner and/or treatments while adding moisture.

CL-792 Hair Steamer

Utilises steam to open up the cuticle for better penetration of conditioner and/or treatments while adding moisture

Directions of use: Add water to the water bottle without exceeding the highest water line. Tighten the drain pipe onto the water bottle. Invert the water bottle and place into its compartment. Connect the power cord and set the timer to the required time. Turn on Switch 1 for medium temperature steam. Turn on Switch 2 for low temperature steam. For high temperature steam, turn on both Switches 1 and 2.

T75SC Hair Steamer on stand

BUY NOW!

Moveable appliance with the function of perming and conditioning and hair dyeing. It can generate staem to accelerate the effect of perming, conditioning and hair dyeing

Weight: 14kg

Size: (L)720 x (W)920 x (H) 1600mm

Power: 650W

Directions of use: Add water to the water bottle without exceeding the highest water line. Tighten the drain pipe onto the water bottle. Invert the water bottle and place into its compartment. Connect the power cord and set the timer to the required time. Turn on Switch 1 for medium temperature steam (350W). Turn on Switch 2 for low temperature steam (300W). For high temperature steam, turn on both Switches 1 and 2.

T75SCH Hair Steamer wall mounted

Wall hung appliance with the function of perming and conditioning and hair dyeing. It can generate staem to accelerate the effect of perming, conditioning and hair dyeing

Weight: 16kg

Size: (L)800 x (W)700 x (H) 1690mm

Power: 650W

Directions of use: Add water to the water bottle without exceeding the highest water line. Tighten the drain pipe onto the water bottle. Invert the water bottle and place into its compartment. Connect the power cord and set the timer to the required time. Turn on Switch 1 for medium temperature steam (350W). Turn on Switch 2 for low temperature steam (300W). For high temperature steam, turn on both Switches 1 and 2.

MTHS-01 Mini Table Top 2-in-1 Ozone O3 Hair & Face Steamer

A personal 2-in-1 hair and face steamer with a delicate appearance, excellent quality and fine workmanship and is easy to use and carry. 

Features:

• The Ion and Ozone function can strengthen hair, accelerate hair treatment, sterilise the scalp and skin and remove dandruff. 
• Its sprayer has the function of generating of O3 which speeds up the pace of hair dyeing and nutrition absorption.
• Transforms into the Ion Vapour to use as a facial steamer by substituting with the spraying pole
• Safe to use: European water level detecting needle powers off machine automatically when water level is below under the heating element
• Note: May not be suitable for hair setting as the hood is slightly smaller than the full-sized hair steamer.
  

View detail

Voltage: 220V 50Hz

Directions of use:

1. Place the steamer carefully on the table.
2. Add water to the water tank without exceeding the highest water line
3. Connect the power cord and turn on the SPRAY switch. The steam will come out within 3-5 minutes.
4. Turn on the "Sterilisation" switch if you need the Ozone function.
5. Place your head carefully into the cap and adjust the height of your chair accordingly

HOOD Hair Dryer

T-206H Wall-Mounted Hood Hair Dryer

Wall hung computer-controlled hair dryer equipped with a 30-minute timer. Temperature can be automatically adjusted from 35°C to 60°C.

Dimensions: (L)730 x (W)730 x (H) 2000mm

Power: 950W

Weight: 16kg

KT-1003 Hood Hair Dryer on Stand

Junior Hood Hair Dryer on Stand