Facial Machines |
|
| |
|
| |
Facial Steamers | Sterilisers | Hot Cabinets | Cold & Hot Cabinets | Cosmetic Camera (Hair,, Scalp & Skin Scanner) | Magnifying Lamp | Facial Treatment |
| |
|
| |
Please note that our electrical equipment run on 240V power unless otherwise stated.
Users in countries that run on 110V power (e.g. US, Japan) will need to purchase their own transformer/adaptor to use the device in their countries. |
| |
|
Facial Steamers |
|
| |
|
| Hot Facial Steamers |
|
| |
|
|
T-707C Facial Steamer on Stand
Ionic facial vapour has the functions of sterilising to hydrate your skin, help prevent wrinkles, loosen debris, clear sinus and congestion. Utilises steam to moisten and whiten the skin, promote blood circulation and expedite its metabolism, so that the sebaceous impurities deposited in sweat glands can be easily discharged.
Dimensions: (L) 630 x (W) 390 x (H) 1400mm
Power: 650W
Weight: 12kg
Directions of use: Before using, fill with distilled water into the jar and do not exceed the red ring. Turn on the switch and leave it spray for 9 minutes. Turn off the switch after use. |
| |
|
|
HT-707A Hot Vapor Facial Steamer on Stand  |
| |
|
|
T-386 Facial Steamer on Stand
|
| |
|
|
MTFS-01 O3 Mini Facial Steamer (Mini Table Top Face Steamer)
A desktop facial steamer so you can do your basic facial at home!
- Abundant mist, sprayer flexible, can be applied for both home use and salon use, heat-proof protector designed on sprayer and body, automatically switchs off when there is no water.
- The steam anions generated by the thin and comfortable ion mist spray can moisten skin, promote blood circulation, remove dirt in the pores, accelerate metabolism and provide oxygen and moisture to skin.
- Choose appropriate essence oil and atomise it with this apparatu
- Aids skin whitening, wrinkle removal and relaxation.

View detail
Voltage: 220V 50Hz
Directions of use:
- Add water to the water tank without exceeding highest water line.
- Connect the power cord and turn on the SPRAY switch .
- Keep a distance of 30-40 cm away from the nozzle during hot steam treatment. The steam will come out within 3-5 minutes.
- Turn on the STERILISATION switch if you need the sterilisation function. Do not swtich on if you are allergic to the STERILISATION function.
- To atmoise aroma oils, place droplets of aroma oil onto a piece of cotton wool about 25x10x3mm but do not soak it. Place the oil infused cotton wool into the aroma compartment.
|
| |
|
|
MTFS-02 Mini Table Top Hot & Cold Vapour Face Steamer  
Compact 2-in-1 hot and cold steamer
The first mini household beauty apparatus in the world that integrates cool and hot sprays into a single device that while separating the hot and cool tanks.
- Hot vapour moistens skin, promotes blood circulation, removes dirt in the pores, accelerates metabolism and provides oxygen and moisture to skin.
- Cool vapour soothes sensitive, acne-prone and excessively thin skin. It is especially effective for shrinking the pores and restoring you with a bright and delicate skin. In the summer, cool mist is specially required to replenish water.
Features:
- Hot vapour eliminates filth, whitens and fades speckles
- Cold vapour replenishs water in the skin and soothes sensitive, acne-prone and excessively thin skin
- Intensifies skin elasticity by alternating cool and hot mists
- Hot spray for deep-level cleansing to revitalize bright skin
- Warm vapour to restore skin elasticity and improve the blood circulation
- Cool vapour for deep-level cleansing, moisturising, oil control and refreshing the skin
Voltage: 220V 50Hz
Directions of use:
- Before using, check that the hot water tank has been screwed in and tighten the drainage plug.
- Add water to the cool and hot water tanks without exceeding the red warning line
- Connect the power cord and switch the machine on.
- Switch on cold vapour for cool treatment. The steam will come out immeidately. At maximum water capacity, the cold vapour will spray for 20 mins
- Switch on hot vapour for hot treatment. The steam will come out within 3 minutes. At maximum water capacity, the hot vapour will spray for 20 mins. Keep a distance of 25cm away from the nozzle during hot steam treatment.
- To get abundant steam at a warm temperature, turn on both the cold and hot vapour functions together
|
| |
|
|
MTFS-03 Mini Facial Sauna (Mini Table Top Face Steamer)
The facial sauna makes it easy for you to cleanse and refresh your skin. Gentle steam mist opens pores, cleansing away impurities, leaving you with cleaner skin, improving your skin tone with soothing steam mist.
Made in Switzerland
Voltage: 220V 50Hz
Directions of use: Fill the vapoursing unit with the required amount of water, using the graduated measure according to the time you require to use the sauna (1st mark: approx 5 mins vaporising time, 2nd mark: 10min, 3rd mark: 20min). Turn on the switch. Hold the profiled edge of the mask gently against your face. Its wide, smooth edge provides a good seal and will not cause the face to be marked. If the vapour proves too hot, set the right-hand rocker switch to position 0 (off) and leave only the left-hand rocker switch in position. The recommended treatment time is between 5 to 15 minutes per treatments. Complete the steam bath, turn the rocker switch to position 0 (off) and rinse face thoroughly with cold water.
Note: After consultation and on the advice of your doctor, the facial sauna may also be used therapeutically for colds, as well as for mouth, throat and nose infections. In such cases, a few drops of camphor, eucalyptus or other water-soluable essential oils may be added when filling the vapourising unit with water, but only in accorandce with medical advice, |
|
|
|
MTFS-04 Mini Facial Steamer (Table Top Face Steamer)
Deep cleansing facial sauna helps to dislodge impurities to achieve a clear and improve your skin texture. Angled mask with soft edging makes resting your head and neck more comfortable. Facial sauna can help to relieve sinus pressure and pain.
Directions of use: Fill in beauty lotion into the cup till the indicated line. Turn on the switch and the vapour will be warmed after 5 minutes. The power will automatic cut off when the cup is empty of beauty lotion. There should distance of 10cm between the face and steamer. After steaming, wash face with cold water. The facial muscles will tighten and skin will be gentle and smooth. |
| |
|
|
MTFS-05 Mini Wide Functions Skin Beauty Table Top FaceSteamer
|
| |
|
|
Holo Electron Lucas Atomiser Hand Held Facial Steamer
Pulverises mineral water, tonics, lotions, flower water, plant decoctions by constant pressure and degrees into a fine spray. The pulverised solution maintains all its qualities, not having been heated nor emitted by a gas, thus the apparatus may be used without any counter indication. Particularly useful for cleaning the skin and removing last traces of makeup. Cosmetic products and treatments (creams etc) will be more effective on skin which has been perfectly cleaned of all impurities by pulverisation
Height: 22cm
Power: 350W
Voltage: 220V
Weight: 1.2kg |
| |
|
|
|
| |
|
| Cool Facial Steamers |
|
| |
|
|
DE-335A Cool Mist Facial Steamer on Stand  |
| |
|
|
DE-335 Table Top Cool Mist Facial Steamer |
| |
|
|
HT-303 Cool Vapor Facial Steamer on Stand
|
| |
|
|
RT-1000 Table Top Cool Mist Facial Steamer 
Features:
- Emits clean cool mist especially suitable for sensitive skin
- Uses ultrasonic operation to emit only mist without water spots
- Adjustable nozzle for any required angle
- Energy efficient, low power consumption
- Automatic timer control
- Power automatically shuts off when there is no water
- Easy to clean water reservoir
- Quiet operation
- Water capacity: 4.7 litres / 1.3 gallons
Dimensions: 340 x 180 x 290 mm
Power: 45W
Voltage: 220V AC
Weight: 4kg
Directions of use: Use only clean or tap water or professional beauty liquid. When using professional beauty liquid, mix 30cc beauty liquid with 1 gallon of clean water to fill the tank. Do not use hard water as it will damage the ultrasonic transducer. Make sure water reservoir is placed evenly on top of the base. When the power is on, the timer is intially set at TIME 2 (emit 3 mins of mist, stop for 10 mins, repeat). For continous mist emission, set the timer at TIME 1 position. When the water level becomes low, the power will cut off automatically. Use for 10-15 minutes per session. |
| |
|
|
TG888 Hot / Cool Facial steamer
Features:
- Multifunctional beauty steamer that emits hot and cold steam
- Temperature from 30 to 75°C
- Heats up in just 30 seconds
- Switch temperatures in just 90 seconds
- Adjustable nozzle
- Easy to clean water reservoir
|
| |
|
Sterilizers |
| |
|
|
S-20 Sterilizer
Ultraviolet sanitiser can sanitise glass pipes, brushes, scissors, combs and etc. Special designed to isolate UV rays inside the sanitiser.
Dimensions: (L) 370 x (W) 220 x (H) 240mm
Power: 10W
Weight: 5kg
Directions of use:
- Place objects you wish to disinfect in the steriliser and close the cover of the steriliser. Turn on the power switch. The sterilisation will complete after 15-20 minutes. While power is on and supplies are being disinfected do not open the sterilizer. The sterilizer uses ultraviolet rays, which can be harmful to the eye. Never look directly into an ultraviolet light.
- It is not necessary to keep this function on for long periods of time due to the fact that this sterilizer will retain heat. In order to preserve the life span of the ultraviolet light source please do not leave the disinfectant light on for more than 30 minutes at a time.
|
| |
|
|
HT-209 Sterilizer
|
| |
|
|
HT-20 Sterilizer |
| |
|
|
DS-1 Sterilizer 11L 18W
The DS-1 Sterilizer is a compact and convenient sterilizer suitable for the elimination of germs on glass, scissors, brushes, plastic tools or any manicure/pedicure tools. It provides a clean germ-free environment for storage of implements and tools.
Voltage: 220V/50Hz
Capacity: 11L
Power: 18W
Features:
- UV rays for sterilization of germs
- Electronic timer for automatic power-off
- Automatic safety switch-off when door is opened
|
| |
|
|
DS-2 Bead Sterilizer Bottle
Directions of use:
1. Place the device on a stable surface.
2. Open the lid and put quartz sands up to no more than 80% volume of tank.
3. Connect to power, and then turn on the switch, heating light will turn red and the device begins to heat the quartz sands.
4. After heating 10--12 minutes when the light turns off, insert tools need disinfection (such as: scissors, razors, and so on) into quartz sands vertically.
5. Heat the tools for 20--30 seconds, then put on adiabatic gloves and take out the sterilized tools.
Technical parameters:
Automatic temperature: 200℃
Power: 75 W
Voltage: 220 V/110V 50 Hz/60Hz |
| |
|
|
001 Sterilizer
|
| |
|
|
Ultrasonic Cleaner |
| |
|
Hot Cabinets |
| |
|
|
T-800 Hot Cabinet towel warmer
Hot Cabinet/Towel Warmer/Tower Steriliser with temperature control that prevents overheating. WIth a capacity of two dozen towels, the interior maintains a constant temperature of 80degrees celsius. Used to disinfect cosmetic and medical supplies in the hot towel cabinet using ultra violet light. Beneath the door is a tray that catches drips.
Dimensions: (L) 450 x (W) 310 x (H) 320mm
Power: 200W
Weight: 9kg
Directions of use:
Sterilisation
- Place objects you wish to disinfect in the hot towel cabinet. Turn on the power switch and the green light will come on. 5 minutes later, put the towels into the cabiet toether with the stainless net. The sterilisation will be complete after 1 hour. After this time turn power switch off.
- While power is on and supplies are being disinfected do not open the hot towel cabinet. The hot towel cabinet uses ultraviolet rays, which can be harmful to the eye. Never look directly into an ultraviolet light. Also please turn off the hot towel cabinet when it is not in use in order to conserve energy.
- In order to preserve the life span of the ultraviolet light source please do not leave the disinfectant light on for more than 30 minutes at a time.
Towel warming
- The heating function of this hot towel cabinet can be turned on even when the power button is in the off position.
- In order to use this hot towel cabinet to heat up towels, place moistened towels inside the hot towel cabinet and turn the right switch on, the red light will comen on. Once the hot towel cabinet has reached a certain temperature this light will turn off.
- It is not necessary to keep this function on for long periods of time due to the fact that this hot towel cabinet will retain heat.
- If you wish to heat and disinfect at the same time simply turn both functions on. Again when you are not using the hot towel cabinet please turn all functions off.
|
| |
|
|
HT-800 Hot Cabinet towel warmer
|
|
|
|
KR-200 Hot Cabinet towel warmer
External Size: (L) 460 x (W) 350 x (H) 350mm
Internal Size: (L) 360 x (W) 250 x (H) 210mm
Weight 10.10kg
Volume: 20 litres Power: 200W, 220V/50Hz |
| |
|
|
KT-1016 Hot Cabinet towel warmer
Heat-retaining
Dimensions: (L) 280 x (W) 340 x (H) 250mm
Weight. 5.5kg |
| |
|
|
DHT-1 Mini Hot Towel Cabinet 
The Mini Hot Towel Cabinet is equipped with micro-computer heating temperature control devices and mounted with protection against over-heating. The micro-computer also automatically maintains the temperature at pre-set levels.
Volume: 5L
Capacity: 10-12 towels
Power: 200W
Voltage: 220-240V, 50-60Hz
Temperature:70°C ± 10°C |
| |
|
|
DHT-2 UV Hot Towel Cabinet  
Volume: 32L
Power: 400W
Voltage: 220-240V, 50-60Hz
Temperature:70°C ± 10°C |
| |
|
|
DHT-3 UV Hot Towel Cabinet  
Volume: 46L
Power: 400W
Voltage: 220-240V, 50-60Hz
Temperature:70°C ± 10°C |
| |
|
|
DHT-4 UV Hot Towel Cabinet  
Volume:
48L
Power:
600W
Voltage: 220-240V, 50-60Hz
Temperature:70°C ± 10°C |
| |
|
| |
DHT-5 UV Hot Towel Cabinet  
Volume: 52L
Power: 600W
Voltage: 220-240V, 50-60Hz
Temperature:70°C ± 10°C |
| |
|
Cold & Hot Cabinets |
|
| |
|
|
DHC-1 Cold&Hot Towel Cabinet 
The DHC-1 Hot & Cold Cabinet is a luxury high-tech electrical appliance with advanced thermoelectric temperature control and semiconductor cooling technology. The cabinet body is made of high quality coated sheet sheets and inner container formed by highly conductive aluminium profiles to quickly heat towels to desired temperature.
Features:
- Fully automatic temperature control to maintain towels at the set temperature.
- Door can be opened both to the left and right for convenience
Volume: 16L
Capacity: 50-60 towels
Temperature:70°C ± 10°C for heating, 10°C-15°C lower than ambient temperature for cooling
Power: 200W for heating, 50W for cooling
Voltage: 220-240V, 50-60Hz |
| |
|
|
DHC-2 Cold&Hot Towel Cabinet  
Volume: 32L |
| |
|
Cosmetic Camera (Hair,Scalp & Skin Scanner)
|
|
| |
|
|
H1-215-USB Cosmetic Camera 
(Hair,Scalp & Skin Scanner)
Features:
- 1300,000 pixels 1/4” Color VGA CMOS Image sensor apply
- Direct connection to PC through USB port
- Use a button on a probe or foot switch to capture the image without image shaking
- UV light to sterilize each caps (In direct contact to customer's skin) while camera is on the main body.
- Provide high resolution natural color with light delivery caps.
- Easy zoom control function makes magnification control(X12~X100) available with changing lens (X400 Lens provided basically)
- It is possible to save and manage images by date with bundle software coming with the camera
- Image management Software 'Cosmanager', 'Skinsys' and 'Hairsys' can provide professional care
- Use together with Create Care Master scalp
machine for a complete salon scalp treatment course
- Made in Korea

|
| |
|
|
H2-USB225 Cosmetic Camera 
(Hair,Scalp & Skin Scanner)
Features:
- 307,200 pixels 1/4" Color VGA CMOS Image Sensor
- Direct connection to PC through USB port
- It is easy to take images using capture button
- It is possible to save and manage images by date with bundle software coming with the camera
- It is more effective to use polarized cap for client's education
- Simple and convenient design and comes with portable carrying case
- Various applications: it provides client's education for skin, scalp, hair conditions through various magnification rates (X12, X40, X50, X100) without changing lens
- Image management Software 'Cosmanager', 'Skinsys' and 'Hairsys' can provide professional care
- Use together with Create Care Master scalp
machine for a complete salon scalp treatment course
- Made in Korea

|
| |
|
|
Hairsys 
(Alopecia, Scalp and Hair Analysis Software)
Hairsys is a alopecia, scalp and hair analysis software for more systematic and sientific customer consulting which presents the detail information of alopecia, hair and hair type analysis and proper care method. You can use this software widely for management of analysis result as well as product, sales and shop for life long customer.
Features:
- Alopecia/Hair/Scalp analysis and measurement function:
- Increase customer satisfaction rate by the introducing hair and hair scalp care method based on analysis results. With the comparison before and after image, present the alopecia, hair scalp and hair counselling.
- Customer management function:
- You can conveniently register the customer and continually save and manage the customer's analysis detail. With the customer reservation and customer information registration function, make the customer visit the shop more frequently.
- Shop management function:
- It provides with the customer-oriented interface considering the user's convenience to the most. You can print the analysis results and invoices anytime.
|
| |
|
|
F-1 Skin Scanner
Use a special wood lamp to illuminate skin conditions. All skin condition will luminous when skin exposed to the deep violet rays of the wood lamp, then the beautician will process the proper treatment according to skin type.
Directions of use: Open the back part of the machine like a tent and swing the lid up so that the skirt of the machine will be opened and set up. Switch on the main power and ask your client to put the face inside the tent and look at the small mirror.
In this way, beautician can be analysed client’s face base by interperting the colours that appear under the ultra-violet. |
| |
|
|
|
| |
|
|
Italy LED EVO Magnifying Lamp  
Magnifying lamp with biconvex lens in optical glass complete with a 15.4 W LED bulb, protected by a light-breaking screen with a 24V electronic feeder. 1.75X
Made in Italy 
Finish: White or Chrome
Support: Floor standing
- Lens: 3 diopters
- Lamp: 22W - G10q
- Power: 22W
- Voltage: 230V
- Weight: 2.7kg (Lamp only)
|
| |
|
|
Italy EVO Magnifying Lamp  
Magnifying lamp with biconvex lens in optical glass complete with a 22 W fluorescent bulb, protected by a light-breaking screen with a 24V electronic feeder. 1.75X.
Made in Italy 
Finish: White or Chrome
Support: Floor standing
- Lens: 3 diopters
- Lamp: 22W - G10q
- Power: 22W
- Voltage: 230V
- Weight: 2.7kg (Lamp only)
|
|
|
|
Italy Tabletop magnifying lamp  
Tabletop magnifying lamp comes with 22 W fluorescent bulb, diffuser screen and complete with heavy base for stability. 1.75X.
Made in Italy 
Finish: White or Chrome
Support: Tabletop base
Specifications:
- Lens: 3 diopters
- Lamp: 22W - G10q
- Power: 22W
- Voltage: 230V
- Weight:7.7kg (Lamp and complete base)
|
| |
|
|
Italy Chrome Magnifying Lamp  
Projector with biconvex lens in optical glass complete with a 22 W fluorescent bulb, protected by a light-breaking screen with a 24V electronic feeder. 1.75X.
Made in Italy 
Finish: Chrome only
Support: Floor standing
- Lens: 3 diopters
- Lamp: 22W - G10q
- Power: 22W
- Voltage: 230V
- Weight: 2.6 kg (Lamp only)
|
| |
|
|
Italy Chrome Infrared Lamp
This porcelain lamp socket, balance switch and headlight with double cooling air space for I.R. lamps.
Made in Italy  |
|
|
|
Italy Double Chrome Infrared Lamp
Group consists of two articles lamp with switch housing and 500 watt max light dimmer.
Made in Italy 
|
|
|
|
Italy Ear Lamp
This lamp consists of balance switch, lamp socket with feeding cable to the socket 2P-24V.
Made in Italy  |
| |
|
|
T51A Floor standing magnifying lamp 
- One 22W fluorescent ring tube.
- Len's dimension: 127mm (5 inch) with dust proof cover for lens protection
- Magnification factor: 3X, 5X, 8X, 10X
|
| |
|
|
K-50 magnifying lamp  |
| |
|
|
T-50 Magnifying Lamp
Cold light lamp with mild light will not harm the eyes; the glass can magnify 5 times. Suitable for the inspection of skin.
Dimensions: (L) 1400 x (W) 240 x (H) 1090mm
Power: 22W
Weight: 3kg |
| |
|
|
Stand for Lamp |
| |
|
|
Wall Holder for Lamp |
| |
|
|
Clamp for Lamp |
| |
|
| |
Chrome Trolley |
| |
|
|
Peak Mini Magnifying Lamp  
Magnification: 2.2X, 3X |
| |
|
|
#1 Loop HeadBand Magnifier 
Magnification: 1.7X, 2X, 2.5X, 3.5X, 4X |
| |
|
|
#2 Loop HeadBand Magnifier 
Magnification: 1.7X, 2X, 2.5X, 3.5X |
| |
|
|
#3 VUEMAX PRO Head Magnifier 
Magnification: 1.2X, 1.8X, 2.5X, 3.5X |
| |
|
Facial Treatment |
|
| |
|
|
979 Cool & Warm Co-Thermal Facial Massager
With warm and cool massage, eliminate wrinkles, increase skin elasticity, eliminate the red speckles and the scars. Cold effect checks odema and relieves the pain in part of the body by freezing and resisting inflammation. Hot effect accelerates blood circulation, adjusts muscles, sprain and neuralgia.
Dimensions: (L) 165 x (W) 266 x (H) 110mm
Power: 20W
Weight: 2.2 kg |
|
|
|
M-203P Facial High-Frequency
Beauty facial high frequency supply’s ultraviolet sterilisation through glass electrodes.
By means of the heating action of a high frequency generator through glass ducts, skin can attain sterilising healing effect. Equipped with 4 different types of glass ducts.
Dimensions: (L) 265 x (W) 220 x (H) 110mm
Power: 1.5W
Weight: 2.7kg |
|
|
|
M-303P Beauty Facial Massage Brush
The purpose of the Facial Brush Machine is to slough off the dead cells (exfoliate) and to remove any dirt and grime that clings to the surface of the skin.
Can rotate left and right, with the function of massage and cleanse face plus the removal of cuticles
Dimensions: (L) 265 x (W) 220 x (H) 110mm
Power: 18W
Weight: 3kg
Directions of use: Before brushing the face, should be vaporized or steamed with warm towels to soften the dead surface cells so that can be removed easily. |
| |
|
|
M-606 Galvanic
Infuse nourishment, deeply cleanse skin and remove the impurities
Dimensions: (L) 265 x (W) 220 x (H) 110mm
Power: 18W
Weight: 2kg
Directions of use: Before brushing the face, should be vaporized or steamed with warm towels to soften the dead surface cells so that can be removed easily. |
| |
|
|
7000P 8 functions Facial Machine
Functions:
- Vaporizer (Model M-2)
- Remove pimples
- Spray tonics
- Brush
- High frequency
- Galvanic
- Magnifying lamp
- Wood lamp
Dimensions: (L) 480 x (W) 360 x (H) 1530mm
Power: 835W
Weight: 40.5kg |
| |
|
|
628 ultrasonic  
Digital ultrasonic
|
| |
|
| |
Related Products:

|